StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Range of semiconductor devices and circuits - Coursework Example

Cite this document
Summary
Date: April 10, 2015 Question 1 The internal circuitry of an ohmmeter has a voltage source which is connected to its leads when it is being used to measure resistance. The existence of this voltage can be utilized to bias a diode without connecting it to a circuit…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.1% of users find it useful
Range of semiconductor devices and circuits
Read Text Preview

Extract of sample "Range of semiconductor devices and circuits"

Download file to see previous pages

A good diode should posses forward to reverse resistance ratio of 10:1 with others with the ratio up to 100:1. If a diode is open, it will show infinite resistance in both directions. On the other hand, a shorted resistance will show low resistance in both directions. The procedure for testing the diode using an ohmmeter only is as illustrated in the following steps. 1. The Ohmmeter is configured to measure on the lowest range. If it’s a digital ohmmeter, a 2-kohm range or the nearest equivalent is used. 2. The ohmmeter leads are connected across the diode with the positive red probe on the P-material and the negative black probe on the N- material as shown in the diagram below. 3. The measured resistance of the diode is measured; Rf is recorded after which the setup is disconnected. 4. After the disconnection, the leads of the ohmmeter are reversed and connected in the reverse direction i.e. the positive red probe is connected to the N – material on the diode and the negative black probe is connected to the P – material on the diode as indicated in the figure below. 5. The measured reverse resistance RR (reverse resistance is recorded) 6.

The forward and the reverse resistance ratio is calculated as RR/RF 7. If the reverse resistance ratio is equal to one or very close to one, then the diode is faulty. In the same way the polarity of the diode can be identified. When the diode shows infinite resistance the material connecting to the positive red probe of the ohmmeter is the P – material of the diode. On the contrary, the part connected to the Negative black probe of the ohmmeter is the N – material of the Diode. Question3 VRMS = Vm*0.

7071 = 100*0.7071 =70.71 Question 4 a) Ripple factor = Vrms/Vdc Capacitance = 50micro Farad 50*80*10-6 =4000*10-6 4*10-3 (4*10-3)*2500 10 10*2 = 20 20* v3 = 34.64 34.64*4 = 138.56 1/138.56 = 0.0072 Ripple factor = 0.0072*100% = 0.72% b) 50*100*10-6 5*10-3 (5*10-3)*12000 60,000*10-3 =60 60*2 = 120 120* v3= 207.84 207.84*4 = 831.38 1/831.38 = 0.0012 Ripple factor = 0.0012*100% = 0.12% Question 5 Block diagram of a complete power supply Analyze the operation of different types of amplifier Summing up amplifier This type of amplifier is used to add two voltages.

The output voltage is equivalent to the sum of the input voltages. With summing up amplifiers, the output voltage cannot be greater than the power supply in case of exceeding the power supply, the amplifier is damaged. Summing up amplifiers are of twp types, Non – inverting and inverting amplifiers. Non – inverting amplifiers does not have an effect on the polarity of t

...Download file to see next pages Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Range of semiconductor devices and circuits Coursework”, n.d.)
Range of semiconductor devices and circuits Coursework. Retrieved from https://studentshare.org/physics/1403144-range-of-semiconductor-devices-and-circuits
(Range of Semiconductor Devices and Circuits Coursework)
Range of Semiconductor Devices and Circuits Coursework. https://studentshare.org/physics/1403144-range-of-semiconductor-devices-and-circuits.
“Range of Semiconductor Devices and Circuits Coursework”, n.d. https://studentshare.org/physics/1403144-range-of-semiconductor-devices-and-circuits.
  • Cited: 0 times

CHECK THESE SAMPLES OF Range of semiconductor devices and circuits

Electronic Fundamentals

The use of the voltage divider means that the device can operate across a range of supply voltages.... Comparison with bi-polar junction transistors 9 3References 10 1 555 Timer Integrated Circuit Oscillator circuits are critical to the functioning of any electronic device involved in cyclical measurement, or that involve periodic states or waveforms [1].... hellip; This covers a staggeringly wide array of electronic devices today....
8 Pages (2000 words) Essay

Thermocouple and thermistor

The range of modern thermal sensing devices includes thermoelectric, resistive, semi-conductive, optical, acoustic, and piezo-electric detectors.... Principle and Design of the Thermocouple Thermocouples are based on the discovery by Thomas Johann Seebeck of thermoelectric currents during his studies of electromagnetic effects using bismuth-copper and bismuth-antimony circuits.... The observation of Seebeck in 1821 that small currents flow in circuits made up of two different conductors, when their junctions are maintained at dissimilar temperatures is called the Seebeck Effect and is the principle on which thermocouples are founded....
10 Pages (2500 words) Essay

Electrical circuits

Electronic components in electrical circuits include semiconductor devices diode, op amp and transistors.... Performing signal processing in the semiconductor devices is meant to get information about input signal like RMS, peak value, the relative phase and the amplitude envelope.... In The report looks deeper into the literature review of electrical circuits and electronic components.... RLC response characteristics in different connection conditions have been put out expounding on the effects of loading and use of active and passive devices in electrical circuits....
15 Pages (3750 words) Lab Report

Electro Magnetic Compatibility for Boiler Controller

initially the role of EMI in electronic circuits and their adverse effects have been dealt with in detail.... This report discusses EMC design rules pertaining to a specific product – Boiler Controller.... If the EMC is not considered in the design sequence, it would be too hard to meet the EMC requirements later....
7 Pages (1750 words) Research Paper

Intel Leading the Semiconductor Industry

The US, however, remained the leader and accounted for 30 per cent of the total sales of semiconductor across the world.... Among the top ten firms of semiconductor manufacturing industry across the world five of them were of US origin while three belonged to Japan and two of them were of European origin.... The process of semiconductor manufacturing begins with the production of wafers which provides the base to the layers.... The integrated circuits are formed by laying numerous layers on the wafers thereby forming a specific pattern on it....
8 Pages (2000 words) Case Study

What is an Operational Amplifier

Vacuum tube devices were essential to the development of amplifier technology because they made possible for the first time the non-linear manipulation of voltage and current....  This paper "What is an Operational Amplifier?... discusses the origins and development of the operational amplifier....
9 Pages (2250 words) Term Paper

Electronic Fundamentals

The use of the voltage divider means that the device can operate across a range of supply voltages.... The paper "Electronic Fundamentals" highlights that the gate of a FET is insulated from the conducting portion of the device by an oxide layer.... This means that no DC gate current is consumed....
8 Pages (2000 words) Term Paper

Trends Emerging from SOC Technology

ystem on Chip can have billions of transistors, supporting a wide range of functions (processors/controllers application-specific modules, data storage, and mixed-signal circuits).... hellip; The author states that silicon semiconductors are used in making electronic devices such as diodes, rectifiers, transistors, and integrated circuits.... Before the invention of the integrated circuit, scientists used the vacuum tube to create complex electrical circuits....
6 Pages (1500 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us