StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

The Methods Section in Optimization of an Optical System - Term Paper Example

Cite this document
Summary
The writer of this paper suggests that “Optimization of an Optical System Based on the Taguchi Method for Quantitative Analysis of Point-of-Care Testing” (Chia et al 2014) is an article that uses quantitative a research to present an optical review system.merchandise and a new exposure model ranging from qualitative to quantitative investigation…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.4% of users find it useful
The Methods Section in Optimization of an Optical System
Read Text Preview

Extract of sample "The Methods Section in Optimization of an Optical System"

Taguchi method was also used to reduce the standard deviation to increase the signal to the noise ratio. This research cannot be replicated because it not only complicated, but it requires a lot of expertise. The Taguchi method requires a lot of concentration in the sense that, the data required is important, and any loss of the data will lead to inconclusive results that are required after the experiment. Additionally, the method requires commercial rapid tests in order to achieve the optimum results required in the research (Austin & Leong, 2006).

It is clear that the Taguchi method, achieve enhanced linearity between the concentration and the grayscale helping in decreasing the standard deviation. An issue that requires further clarification in the research is on the use of the Taguchi method increases the modification of manufactured goods. By so doing, the research will benefit many people as it has proved to be effective.

Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(The Methods Section in Optimization of an Optical System Term Paper, n.d.)
The Methods Section in Optimization of an Optical System Term Paper. Retrieved from https://studentshare.org/technology/1664576-discussion-1-the-methods-section-week-7-722
(The Methods Section in Optimization of an Optical System Term Paper)
The Methods Section in Optimization of an Optical System Term Paper. https://studentshare.org/technology/1664576-discussion-1-the-methods-section-week-7-722.
“The Methods Section in Optimization of an Optical System Term Paper”, n.d. https://studentshare.org/technology/1664576-discussion-1-the-methods-section-week-7-722.
  • Cited: 0 times

CHECK THESE SAMPLES OF The Methods Section in Optimization of an Optical System

Analog Circuit Computer Aided Design (CAD)

(1990) developed an analog silicon compilation system for CMOS op amps (OPASYN).... The optimization technique it adopts is geometric programming.... This section deals with the existing literatures related to analog circuit optimization.... This section deals with the existing literatures related to analog circuit optimization.... Using parametric optimization the circuit then determines optimal value for its parameters....
4 Pages (1000 words) Essay

Aerodynamic Shape Optimization for a 3d Multi-Element Airfoil

A mesh morpher algorithm is used in conjunction to a direct search optimization algorithm in order to optimize the aerodynamics… Navier stokes equations are solved for turbulent, steady-state, incompressible flow by using k-epsilon model and SIMPLE algorithm using the commercial code ANSYS Fluent.... Both the mesh morpher algorithm and the direct search algorithm are gradient based optimization techniques.... When using these designs in a 3D element optimization airfoil, the control function is parameterized with some set of design variables and a suitable cost function is either minimized or maximized....
8 Pages (2000 words) Research Paper

ODE Solver and Optimization

The new structures control techniques such as passive control system, active control system and semi active control system giving special importance on improvement of wind and seismic responses of buildings and bridges.... The algorithm is set through a gradient-based optimization approach that simultaneously controls all inter-story displacements in nonlinearly degrading buildings made of metal like steel....
4 Pages (1000 words) Essay

Summarizing

He developed a horizontal axis wind turbine rig to provide a higher propulsive force for sailing craft in any direction relative to… Both linear and non-linear approaches were used in effort to develop a versatile, low drag and stable hydrofoil system that could be used to propel a surface craft.... The paper categorizes hydrofoil design in four types – Multiple-Foil Ladder system, Surface-Piercing V Foil system, Submerged Foil with Planing Surface Control system and Fully Submerged Foil system – and discusses their strengths and weaknesses....
5 Pages (1250 words) Research Paper

Optimal Profitability in Organizations

?Profit optimization remains an important aspect in most organizations.... A research was conducted, and the primary methods of collecting data were used.... The following report is based on the research conducted by the Google Company in search of methods that would lead the company to optimizing its profits....
10 Pages (2500 words) Research Paper

Control of Industrial Processes

The third experiment involved the introduction of an external stressor to the system and then observing the response of the system to the external stressor.... The fourth experiment involved the application of several fundamental changes that the system might experience and observing the stability and response of the system to the changes.... The experiment was divided into four sections where the first section consisted of a two-step closed control loop with the power button being turned on and off with respect to temperature at given values....
5 Pages (1250 words) Lab Report

Microcalcifications Detection in Mammograms Based on Ant Colony Optimization and Markov Random Field

From the paper "Microcalcifications Detection in Mammograms Based on Ant Colony optimization and Markov Random Field" it is clear that the importance of the segmentation phase during the analysis of x-ray breast images led us to investigate new intelligent techniques.... hellip; In this paper, we presented the results of the application of our novel technique based on an ant colony optimization for microcalcification detection in a mammogram.... When comparing the results of the conventional methods, ACO-MRF showed a better ability to find the best labeling and segmentation of microcalcifications....
15 Pages (3750 words) Coursework

Route Planning for Two Wafer Fabs with Capacity-Sharing Mechanisms

The paper "Route Planning for Two Wafer Fabs with Capacity-Sharing Mechanisms" paper focuses on the implementation of a dual fab system for semiconductors.... Through more extensive research, this system can be made more efficient and further improvements can be done on the system.... In order to fill this gap, there is needed to come up with a system that allows for full utilization of the available space and equipment.... This method has also been tested and its performance compared to other methods and the results support the method as it performs much better than all the other methods....
6 Pages (1500 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us